Currently Empty: ₹0.00
ADXL345 3-Axis Digital Accelerometer Sensor Module
Verified by – Kiwano
Accelerometer is used to measure both static acceleration i.e. gravitational and dynamic acceleration i.e. motion or shock. In most of the robotics applications, it is used to measure the tilt of the object. The ADXL345 is a low power, MEMS, three-axis accelerometer module with both SPI and I2C interfaces to communicate with your controller like Arduino, Raspberry Pi, PIC, etc. It also has user-selectable sensitivity and 10-13bit of resolution. This Digital Accelerometer has a voltage regulator on board hence can be connected to both 5V and 3.3V powered controllers. Its high-resolution 4mg/LSB also enables it to measure less than 1° change in the orientation of the object. The ADXL345 Sensor can be used in Robotics applications, measuring vibration in a machine, in the data acquisition system of a vehicle, measuring the motions of a bridge, etc. It can also be used to detect taps on an object.
Specifications
- 3V-6V DC Supply Voltage
- Measuring range ±16g
- Onboard LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- Can be interface with 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power Consumption: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Free-Fall Detection
- Digital Output with SPI and I2C interfaces
Product Description
To connect the ADXL345 Module to your controller like Arduino, Raspberry Pi, or PIC, you first need to power the device from either 5V or 3.3V supply. Then based on your requirement, you can connect I2C or SPI connections to the respective pins on your controller and you are good to go.
Package Includes:
1 x ADXL345 3-Axis Digital Accelerometer Sensor Module with Berg Strip
Shreyash Chetule
The ADxL345sensor can be used in Robotic application measuring
Vibration in a machine in the
Data acquisition system of a project measuring the motions
Of a bridge etc
Tanmay Dahake
Accelerometer is used to measure both static acceleration i.e. gravitational and dynamic acceleration i.e. motion or shock. In most of the robotics applications, it is used to measure the tilt of the object.
Krantini Wahane
Very good sensor I used this sensor in my project flow of current very useful ☺️
Shreyash Chetule
Accelerometer is used to measure both static acceleration i.e. gravitational and dynamic acceleration i.e. motion or shock. In most of the robotics applications, it is used to measure the tilt of the object.
Dishant Raut
it is very nice product
Guniram Selokar
nice product